X700 Key Features
What's in the box
- Dash Cam
- 12V Power Cable
- 16GB MicroSD Card
- Windshield Mount
- Spare 3M Mounting Tape
- Adhesive Cable Clips
- Quick Start Guide
Specification
- Resolution:Front – Full HD (1920 x 1080)Rear – Full HD (1920 x 1080) [Optional]
- Camera :Front – 2.13MP Sony STARVISRear – 2.12MP Pixelplus [Optional]
- Frame Rate: 30 fps
- Viewing Angle: 140° (Diagonal)
- Weight : 104g (0.23 lb)
- Storage Temperature: -20°~ 70°C (-4°~ 158°F)
- Operating Temperature: -10°~ 60°C (14°~ 140°F)
- Capacity : MicroSD card 16/32/64/128GB (UHS-I)
- Input Power: DC 12/24V, Built-in Super Capacitor
- GPS: Optional External GPS Antenna
- Download Full Specification
Dimensions
Touchscreen
Conveniently adjust settings or review footage with the X700’s 2.7” LCD touchscreen.
The touchscreen features an IPS panel that makes viewing easy from any angle and at any time of the day.
VIDEO PLAYBACK
LIVE VIEW
ROAD SAFETY WARNINGS
SETTINGS
High Definition Video Quality
Sony Starvis Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.
The 140° wide angle lens view will minimize blind spots to assure recording of all events without fail.
Add a rear camera to capture Full HD 1080p footage with a 125° wide-angle lens.
Parking Surveillance Mode
Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.
Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality
Motion Detection
Monitor and capture any motion around the vehicle for potential vandalism attempts.
Impact Detection
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
Time Lapse Parking Mode
Energy Saving Mode
Super Night Vision
Whilst in parking mode the Thinkware camera uses advancements in lens and computing power to revolutionise night time recording with their Trademarked Super Night Vision.
The system uses ISP (Image Signal Processing) technology and real-time image processing to capture far greater detail at night, further protecting your vehicle whilst parked.
Access your camera's full potential with the Optional GPS Antenna
View Product
Safety Camera Alerts
Get audio warnings from your cash cam when approaching a wide variety of road safety cameras*.
Thinkware Dash Cams provides active alert for these 5 types of road safety cameras while still recording videos.
*UK speed camera (Cyclops) database with regular free updates
Red Light Warning System
Speed Camera Warning System
Red Light & Speed Camera Warning System
Average Speed Warning System
Mobile Zone Warning System
Advanced Driver Assistance System (ADAS)
Forward Collision Warning System
(FCWS)
Warns the driver of impending road hazards.
Front Vehicle Departure Warning
(FVDW)
Informs the driver of the vehicle ahead starting to move.
Lane Departure Warning System
(LDWS)
Detects if the vehicle is veering off the driving lane.
GPS Mapping
With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.
PC / Mac Viewer
The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
Wide Dynamic Range
Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.
Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.
Night-Time Quality Correction
Most videos recorded on a dashcam in the dark are generally difficult to make out details. That is why this dashcam uses enhanced sensors that come with a standard function of brightness and colour control as well as noise cancellation. These increase the quality of the image and ensure your videos are always the best quality possible.
Multiple Recording Modes
CONTINUOUS RECORDING MODE
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
INCIDENT RECORDING MODE
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
MANUAL RECORDING MODE
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
FAIL-SAFE RECORDING
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
Format Free Technology
Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.
One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.
High-Temperature Protection System
Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data.
The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.
Rear Camera
Designed to be mounted inside the vehicle on the rear window facing out. A 140° wide-angle lens captures all footage from behind the vehicle in FHD detail. A great enhancement to parking mode.
Learn More
Multiplier Box
Need even more from your camera?
Add the optional Multiplier Box to allow up to 4 additional cameras be added to your front facing dash cam instead of one rear unit.
Simply connect the Multiplier box to the Rear camera feed and then add your choice of side cams, rear external, rear internal or internal infrared cameras.
The perfect solution for passenger cars, light commercial vehicles and HGVs.
View Product
